Case Study: PVC strip curtains in the printing machinery maintenance department

You are located: Home | Projects | PVC strip curtains in the printing machinery maintenance department

PVC strip curtains with a signet ring for the header
PVC strip curtains in the printing machinery maintenance department

The creation of two workshop areas and the reduction of heat loss at the entrance gate

Client: A company specialising in the servicing of printing machinery
Industry: Technical services / industry
Problem: The need to divide the hall into two zones and heat loss at the entrance gate
Solution: PVC strip curtains, including fitting
Production: PVC PRO | pvcpro.eu

s

The challenge

A company specialising in the servicing of printing machinery approached us with two matters.

The first was the creation of two separate workshop areas across the large floor area of the hall. The client wanted to install a wall made of PVC strip curtains across the entire width of the workshop, without erecting any permanent partitions.

The second were heat loss at the entrance gate. The gate was opened frequently, allowing cold air to enter the building, whilst at the same time the passageway had to remain accessible for forklift trucks and other vehicles used on a daily basis.

The client sent us some photos of the property and also asked us to carry out the installation.

In this case, an on-site inspection was required

Having analysed the documentation provided, we have concluded that, given that the large width of the partitions and the complex assembly design We do not want to base the project solely on photographs. Our specialist therefore visited the client and carried out a thorough on-site inspection:

  • options for securing the structure,
  • the height and width of each zone,
  • layout of the hall,
  • the movement of staff and vehicles,
  • conditions at the entrance gate.

Following the measurements and analysis, we presented the following to the client several design options and different types of PVC film.

Two types of conveyor belts in one hall

The curtains in the workshop and at the entrance gate serve different purposes, which is why we have chosen different strips for each of these locations.

PVC strip curtains in the printing machinery maintenance department

Workshop areas

Due to the height of the partitions, we have used strips of standard film, 300 mm wide and 3 mm thick. Wider and thicker strips work well at greater heights, as they provide the curtain with stability and effectively partition the space. This is how they were created two separate workshop areas, between which you can move freely.

PVC strip curtains in the printing machinery maintenance department

Entrance gate

At the gate, we used ribbed strips made from standard film, 300 mm wide and 3 mm thick. The key priority here was to minimise heat loss without hindering the flow of traffic.

The ribbed version was particularly advantageous, as vehicles regularly pass through the gate forklift trucks. The longitudinal ribs on the surface of the strips protect them from abrasion caused by contact with passing vehicles, ensuring that the curtain withstands heavy use. At the same time, it creates an additional barrier that helps to reduce the inflow of cold air into the workshop.

From design to installation

The client was very impressed with the proposals drawn up by our specialists and the way in which we highlighted the advantages of each solution. Once the offer had been accepted, we agreed on a date for installation.

The scope of work was extensive, as it involved constructing two workshop partitions and securing the entrance gate. All the components had to be precisely fitted to the existing hall structure.

Installation on a hot day

On the day of installation, the weather did not make our team’s job any easier. The high temperature took its toll, but did not affect the installation process. We completed the entire job efficiently and without any problems, resulting in a PVC partition system precisely tailored to the building’s intended use.

The end result

The client gained:

  • two clearly separate workshop areas,
  • restricted air flow between parts of the hall,
  • additional protection against heat loss at the entrance gate,
  • good visibility between zones,
  • the free movement of workers,
  • easy manoeuvring of forklift trucks,
  • a solution tailored specifically to the building’s design,
  • a service ranging from site surveys to installation.
p

The choice of curtain depends on where it will be used

Within a single hall, the curtains can operate under completely different conditions. In the workshop areas, the priority was to effectively partition off the space, which is why we used standard 300 × 3 mm PVC strips. At the entrance gate, the main priority was to minimise heat loss amidst heavy forklift traffic, which is why we opted for the ribbed version. Each of the two applications therefore has a solution tailored to its specific conditions, and we implemented the entire project as a single undertaking.

Both solutions from this project – namely the workshop partitions and the curtain at the entrance gate – are among our industrial curtains. On the page featuring this offer, we explain what the ribbed strips are used for, what strip dimensions we use, and how the curtain can be fitted. There is also a configurator where, once you’ve entered the opening dimensions and selected the type of straps, you’ll see a complete curtain set for your hall.

The best summary: A SATISFIED CUSTOMER

Once the installation was complete, we didn’t need a satisfaction survey. The client’s smile and a firm handshake said it all, and for us, that’s the best sign that the project had been carried out exactly as it should have been.
If you have a large hall or an unusual structure, or if you want to create separate zones without building permanent walls, please contact us. We will select the appropriate film and installation system, and if necessary, we will visit the site and carry out the installation.

A similar solution for your premises

Our specialists will help you choose the right type of film, the width of the strips and the installation method to suit the conditions at your premises.